Which grade of TMT steel should I buy?

For standard residential construction in low-to-moderate seismic zones (II–III), Fe500 is adequate. For buildings in high seismic zones (IV–V) or where IS 13920 applies, Fe500D is recommended for its higher ductility. Consult your structural engineer for site-specific requirements.

Brand Comparison

Balmukund TMT vs Mahavir TMT TMT Steel: Price Comparison

Q: Is Balmukund TMT cheaper than Mahavir TMT?

Across 1 cities with data on CoreJoint, Mahavir TMT is cheaper in more cities. The average price difference is ₹500/tonne. Prices vary by city — check the table above for your specific location.

Q: What is the difference between Balmukund TMT and Mahavir TMT TMT steel?

Both Balmukund TMT and Mahavir TMT manufacture BIS-certified TMT steel meeting IS:1786 standards. The price difference reflects manufacturing cost, logistics, and brand positioning. Quality differences between BIS-certified brands in the same grade are marginal — the grade (Fe500 or Fe500D) and diameter are the more important specifications for your project.

Head-to-head price comparison across 1 city using current indicative price data. Last updated: 1 July 2026.

Balmukund TMT

cities cheaper

tied

cities equal

Mahavir TMT

cities cheaper

Mahavir TMT is cheaper in more cities by an average of ₹500/tonne. On a 10-tonne project that difference is ₹5,000. Use the quote tool to get the best offer from local dealers in your city.

City-by-city price comparison

City	Balmukund TMT	Mahavir TMT	Diff
Patna	₹58,000	₹57,500	Mahavir TMT −₹500

Prices are indicative Fe500 rates. Green = cheaper in that city. Updated 1 Jul 2026.

Balmukund TMT — all cities

View prices across India

Mahavir TMT — all cities

View prices across India

Frequently asked questions

Is Balmukund TMT cheaper than Mahavir TMT?

Based on current indicative price data on CoreJoint, Mahavir TMT is cheaper in 1 of 1 cities with comparable prices. The average difference is ₹500/tonne. Your city may differ — use the table above.

What is the difference between Balmukund TMT and Mahavir TMT TMT steel?

Both brands manufacture BIS-certified TMT steel under IS:1786. The price difference primarily reflects logistics and brand positioning rather than quality differences within the same grade. Grade (Fe500/Fe500D) and diameter are the more important specifications for structural use.

Which grade should I buy for my house?

Fe500 is adequate for standard residential construction in low-to-moderate seismic zones. Fe500D is recommended for zones IV and V where IS 13920 applies. Ask your structural engineer for your specific site requirements before purchasing.