Which grade of TMT steel should I buy?

For standard residential construction in low-to-moderate seismic zones (II–III), Fe500 is adequate. For buildings in high seismic zones (IV–V) or where IS 13920 applies, Fe500D is recommended for its higher ductility. Consult your structural engineer for site-specific requirements.

Brand Comparison

JSW Steel vs SAIL TMT Steel: Price Comparison

Q: Is JSW Steel cheaper than SAIL?

Across 1 cities with data on CoreJoint, SAIL is cheaper in more cities. The average price difference is ₹1,000/tonne. Prices vary by city — check the table above for your specific location.

Q: What is the difference between JSW Steel and SAIL TMT steel?

Both JSW Steel and SAIL manufacture BIS-certified TMT steel meeting IS:1786 standards. The price difference reflects manufacturing cost, logistics, and brand positioning. Quality differences between BIS-certified brands in the same grade are marginal — the grade (Fe500 or Fe500D) and diameter are the more important specifications for your project.

Head-to-head price comparison across 1 city using verified dealer data. Last updated: 27 June 2026.

JSW Steel

cities cheaper

tied

cities equal

SAIL

cities cheaper

SAIL is cheaper in more cities by an average of ₹1,000/tonne. On a 10-tonne project that difference is ₹10,000. Use the quote tool to get the best offer from local dealers in your city.

City-by-city price comparison

City	JSW Steel	SAIL	Diff
Delhi	₹59,500	₹58,500	SAIL −₹1,000

Prices are Fe500 rates from verified dealers. Green = cheaper in that city. Updated 27 Jun 2026.

JSW Steel — all cities

View prices across India

SAIL — all cities

View prices across India

Frequently asked questions

Is JSW Steel cheaper than SAIL?

Based on current verified dealer data on CoreJoint, SAIL is cheaper in 1 of 1 cities with comparable prices. The average difference is ₹1,000/tonne. Your city may differ — use the table above.

What is the difference between JSW Steel and SAIL TMT steel?

Both brands manufacture BIS-certified TMT steel under IS:1786. The price difference primarily reflects logistics and brand positioning rather than quality differences within the same grade. Grade (Fe500/Fe500D) and diameter are the more important specifications for structural use.

Which grade should I buy for my house?

Fe500 is adequate for standard residential construction in low-to-moderate seismic zones. Fe500D is recommended for zones IV and V where IS 13920 applies. Ask your structural engineer for your specific site requirements before purchasing.