Which grade of TMT steel should I buy?

For standard residential construction in low-to-moderate seismic zones (II–III), Fe500 is adequate. For buildings in high seismic zones (IV–V) or where IS 13920 applies, Fe500D is recommended for its higher ductility. Consult your structural engineer for site-specific requirements.

Brand Comparison

Kamdhenu vs Tata Steel TMT Steel: Price Comparison

Q: Is Kamdhenu cheaper than Tata Steel?

Across 3 cities with data on CoreJoint, Kamdhenu is cheaper in more cities. The average price difference is ₹1,733/tonne. Prices vary by city — check the table above for your specific location.

Q: What is the difference between Kamdhenu and Tata Steel TMT steel?

Both Kamdhenu and Tata Steel manufacture BIS-certified TMT steel meeting IS:1786 standards. The price difference reflects manufacturing cost, logistics, and brand positioning. Quality differences between BIS-certified brands in the same grade are marginal — the grade (Fe500 or Fe500D) and diameter are the more important specifications for your project.

Head-to-head price comparison across 3 cities using verified dealer data. Last updated: 27 June 2026.

Kamdhenu

cities cheaper

tied

cities equal

Tata Steel

cities cheaper

Kamdhenu is cheaper in more cities by an average of ₹1,733/tonne. On a 10-tonne project that difference is ₹17,330. Use the quote tool to get the best offer from local dealers in your city.

City-by-city price comparison

City	Kamdhenu	Tata Steel	Diff
Bengaluru	₹58,200	₹59,900	Kamdhenu −₹1,700
Delhi	₹57,900	₹59,800	Kamdhenu −₹1,900
Mumbai	₹58,900	₹60,500	Kamdhenu −₹1,600

Prices are Fe500 rates from verified dealers. Green = cheaper in that city. Updated 27 Jun 2026.

Kamdhenu — all cities

View prices across India

Tata Steel — all cities

View prices across India

Frequently asked questions

Is Kamdhenu cheaper than Tata Steel?

Based on current verified dealer data on CoreJoint, Kamdhenu is cheaper in 3 of 3 cities with comparable prices. The average difference is ₹1,733/tonne. Your city may differ — use the table above.

What is the difference between Kamdhenu and Tata Steel TMT steel?

Both brands manufacture BIS-certified TMT steel under IS:1786. The price difference primarily reflects logistics and brand positioning rather than quality differences within the same grade. Grade (Fe500/Fe500D) and diameter are the more important specifications for structural use.

Which grade should I buy for my house?

Fe500 is adequate for standard residential construction in low-to-moderate seismic zones. Fe500D is recommended for zones IV and V where IS 13920 applies. Ask your structural engineer for your specific site requirements before purchasing.