Which grade of TMT steel should I buy?

For standard residential construction in low-to-moderate seismic zones (II–III), Fe500 is adequate. For buildings in high seismic zones (IV–V) or where IS 13920 applies, Fe500D is recommended for its higher ductility. Consult your structural engineer for site-specific requirements.

Brand Comparison

SAIL vs Tata Steel TMT Steel: Price Comparison

Q: Is SAIL cheaper than Tata Steel?

Across 4 cities with data on CoreJoint, SAIL is cheaper in more cities. The average price difference is ₹750/tonne. Prices vary by city — check the table above for your specific location.

Q: What is the difference between SAIL and Tata Steel TMT steel?

Both SAIL and Tata Steel manufacture BIS-certified TMT steel meeting IS:1786 standards. The price difference reflects manufacturing cost, logistics, and brand positioning. Quality differences between BIS-certified brands in the same grade are marginal — the grade (Fe500 or Fe500D) and diameter are the more important specifications for your project.

Head-to-head price comparison across 4 cities using verified dealer data. Last updated: 27 June 2026.

SAIL

cities cheaper

tied

cities equal

Tata Steel

cities cheaper

SAIL is cheaper in more cities by an average of ₹750/tonne. On a 10-tonne project that difference is ₹7,500. Use the quote tool to get the best offer from local dealers in your city.

City-by-city price comparison

City	SAIL	Tata Steel	Diff
Delhi	₹58,500	₹59,800	SAIL −₹1,300
Jamshedpur	₹55,200	₹55,500	SAIL −₹300
Kolkata	₹57,500	₹58,500	SAIL −₹1,000
Ranchi	₹55,800	₹56,200	SAIL −₹400

Prices are Fe500 rates from verified dealers. Green = cheaper in that city. Updated 27 Jun 2026.

SAIL — all cities

View prices across India

Tata Steel — all cities

View prices across India

Frequently asked questions

Is SAIL cheaper than Tata Steel?

Based on current verified dealer data on CoreJoint, SAIL is cheaper in 4 of 4 cities with comparable prices. The average difference is ₹750/tonne. Your city may differ — use the table above.

What is the difference between SAIL and Tata Steel TMT steel?

Both brands manufacture BIS-certified TMT steel under IS:1786. The price difference primarily reflects logistics and brand positioning rather than quality differences within the same grade. Grade (Fe500/Fe500D) and diameter are the more important specifications for structural use.

Which grade should I buy for my house?

Fe500 is adequate for standard residential construction in low-to-moderate seismic zones. Fe500D is recommended for zones IV and V where IS 13920 applies. Ask your structural engineer for your specific site requirements before purchasing.